NAT ,BFD ,NQA 实验

R1配置

<Huawei>U T M
Info: Current terminal monitor is off.
<Huawei>SY
[Huawei]INT LO0
[Huawei-LoopBack0]IP ADD 1.1.1.1 24
[Huawei-LoopBack0]INT G0/0/0
[Huawei-GigabitEthernet0/0/0]IP ADD 100.1.1.1 24
[Huawei]IP route-static 200.1.1.0 24 100.1.1.2
[Huawei]IP route-static 200.1.1.0 24 100.1.1.3 preference 100
[Huawei]IP route-static 4.4.4.0 24 200.1.1.4
[R1]BFD
[R1-bfd]Q
R1]BFD 1 bind peer-ip 200.1.1.4 source-ip 100.1.1.1
[R1-bfd-session-1]discriminator local 1
[R1-bfd-session-1]discriminator remote 4
[R1-bfd-session-1]commit
[R1-bfd-session-1]q
[R1]ip route-static 200.1.1.0 24 100.1.1.2 track bfd-session 1
Info: Succeeded in modifying route.

R2配置
[Huawei]INT G0/0/0
[Huawei-GigabitEthernet0/0/0]IP ADD 100.1.1.2 24
[Huawei-GigabitEthernet0/0/0]INT G0/0/1
[Huawei-GigabitEthernet0/0/1]IP ADD 200.1.1.2 24
[Huawei]IP route-stat

最后

以上就是心灵美可乐最近收集整理的关于NAT ,BFD ,NQA 实验的全部内容，更多相关NAT内容请搜索靠谱客的其他文章。